HP Envy 4502 Installation Settings

Home/HP Envy 4502 Installation Settings
HP Envy 4502 Installation Settings 2020-09-07T04:24:42+00:00

HP envy 4502 installation settings


HP Envy 4502 Printer settings

HP Envy 4502 is an all-in-one wireless printer that uses inkjet printing technology. AirPrint is enabled in this printer, which makes it easy to print from the iPhone or iPad. Set up the printer hardware, install the printer software, and complete the connection setup to operate it successfully.  Continue reading on this page to finish the HP envy 4502 installation settings

 

HP ENVY 4502 SETTINGS

Once you finish the printer setup, you have to configure the printer settings. The simplest way to configure the printer settings is to use the printer’s control panel, which has the following buttons:

  • On/Power – To turn on the printer.
  • Home – To display the home screen on the printer’s display panel.
  • Up arrow & Down arrow – To move up/down in the menu list.
  • Wireless – Press to view the Wi-Fi network status/Press & hold until the Wi-Fi light flashes to start the WPS connection.
  • Back – To return to the previous screen.
  • OK – To select an option/confirm an action.
  • ePrint – To view the web services settings of the printer.
  • Help – To view the help topics.

There are two indicator lamps – power button light and wireless status light.  

HOW TO PRINT?

    • On a Windows computer
    • Load enough paper in the printer.
    • Install the HP printer driver on the computer.
    • Make sure the printer and computer are connected.
    • Open the document you want to print.
    • Click the Print command or icon on the application.
    • Select the printer model and click Properties.
    • Set the print orientation, quality, paper media selection, paper size, and number of copies.
    • Click OK followed by Print to start printing after finishing the HP envy 4502 installation settings.

    HOW TO SCAN?

    • Scan to computer
    • Make sure to install the scanner driver on the computer.
    • Keep the scanner and the computer connected.
    • Open the scanner lid.
    • Place the scanning document along the front right corner of the scanner glass.
    • Close the scanner lid and press the home button.
    • Select Scan > Scan to Computer.
    • Choose the computer, and then the scanner will start to scan.

    HOW TO COPY?

    • Check if you have loaded enough paper in the paper tray.
    • Open the scanner lid and place the document on the scanner glass.
    • Close the scanner lid.
    • Go to the home screen on the printer’s display panel.
    • Tap the Copy menu.
    • Select the number of copies. 
    • Press Start Black Copy to print in black or Start Color Copy to start printing in color.

    HP ENVY 4502 SETUP

    The below procedure will help you set up the HP 4502 printer.

    Step-1: Unbox

     

    • Take out the printer from the carton.
    • Make sure to remove all the packaging tapes and protective materials from the printer.
    • Lift the ink cartridge access door.
    • Remove the protective tapes and covers from inside.
    • Close the ink cartridge access door.
    • Pull out the paper tray and remove the packing tape from it.
    • Slowly push the paper tray inside the printer.

    Step-2: Power connection

    • Look for the printer accessories inside the carton and keep them safe while performing the HP envy 4502 installation settings.
    • Connect the power cord to the printer’s power port and the other end to a wall outlet.
    • Press the printer’s Power button.
    • Configure the language, country/region, date, and time settings on the control panel.

    Step-4: Feed paper

    • Extend the paper tray and pull the paper tray extender.
    • Unfold the paper catch.
    • Move the paper edge guides to the rim of the tray.
    • Arrange the paper in the tray such that the short edge goes in first and the print face is down.
    • Adjust the edge guides to the paper edges, but make sure not to bend the paper.
    • Carefully move the paper tray into the printer.

    Step-4: Install the ink cartridges

    • Open the ink cartridge access door.
    • Let the print head return to the original position.
    • Open the cover of the ink cartridge slot.
    • Unpack the ink cartridge packet you are going to install.
    • Remove the plastic tape and see that you do not touch the contacts.
    • Insert the ink cartridge into the slot until the click sound is heard.
    • Close the cover of the ink cartridge slot.
    • Similarly, install the other ink cartridges.
    • Lower the ink cartridge access door.

Step-5: Align the ink cartridges

  • Follow the guided instructions to print the alignment page.
  • Open the scanner lid.
  • Place the alignment page facing down on the scanner glass.
  • Close the scanner lid and press the OK button to align.

Step-6: Software installation

  • Complete the printer hardware setup and then install the printer software on your computer.
  • The printer driver lets you manage and control the printer from the computer.

HP ENVY 4502 DRIVER DOWNLOAD

  • Open a web browser on your computer.
  • Enter the official HP website URL in the address field and press Enter.
  • Go to the printer’s support page and click the Software, Drivers and Firmware tab.
  • Click the Choose a different OS link.
  • Select your operating system & its version from the drop-down menu.
  • Click the Change button from the HP envy 4502 installation settings .
  • Select the download link of the driver you want to download.
  • After downloading the driver, save it on the desktop.

HP ENVY 4502 DRIVER INSTALLATION

  • Download the printer driver on your computer.
  • Or else, insert the installation CD into the computer and run it.
  • Open the driver installer file.
  • When the HP Easy Start window opens on the screen, click Continue.
  • Following that, read the installation agreements carefully.
  • Now, you have to accept the terms and policies and then click Continue.
  • Follow the guided instructions to complete the installation.

HP ENVY 4502 AUTO WIRELESS CONNECT

  • Connect your computer to a wireless network.
  • Download and install the printer driver.
  • Open the printer driver installer file.
  • Start the printer’s wireless connection setup on the computer.
  • When the printer detects the wireless network, tick the checkbox of Enable HP Auto Wireless Connect.
  • Continue with the HP envy 4502 installation settings and it’s instructions and finish the setup.

HP ENVY 4502 WIRELESS CONNECTION SETUP

  • Turn on the Wi-Fi router network.
  • Connect your computer to the Wi-Fi network.
  • Note the wireless network name and password.
  • Keep the printer turned on during the entire setup process.
  • Get the printer driver on the computer and run the installation.
  • If the printer recognizes the Wi-Fi network, the network name will appear on the screen.
  • Otherwise, select My Printer is Not Shown.
  • Enter the wireless network name and its password manually.
  • Once the connection is made, click Continue.
  • Register your HP printer and then choose how you would use the printer. 
  • Next, select Full Software and Drivers (Recommended) under software and driver.
  • Click Continue and then wait until the installation is complete.
  • When the connection setup is done, click Finish.

PAPER JAM

If a paper jam has occurred inside the printer, follow the given steps to clear it while HP envy 4502 installation settings .

  • Lift the ink cartridge access door.
  • Remove the cleanout and slowly pull the jammed paper from the rear roller.
  • Replace the cleanout in the printer.
  • Close the ink cartridge access door.
  • On the printer’s control panel, press the OK button to resume the current printing job.

SCANNING ISSUES

  • Make sure to install the HP scanner driver on your computer.
  • Check if the computer and the scanner are connected to the same network.
  • Verify if you are using the valid wireless network password to connect the scanner and computer.
  • If you are scanning a high-resolution image or document, reduce the resolution and then try to scan. 
  • See if your computer satisfies the basic requirements for the scan operation.
  • Clean the scanner glass to avoid low-quality images and finish the HP envy 4502 installation settings successfully.

HP envy 4502 installation settings

 
Content Protection by DMCA.com